LandMark™ 005 IMU VELOX™ et VELOX™ Plus
La LandMark™ 005 IMU est la centrale inertielle MEMS à 6 axes haute vitesse de Gladiator Technologies. Cette centrale inertielle (IMU) avec seulement 19 grammes, offre une polyvalence d’applications pour les utilisateurs ayant des contraintes d’espace tout en exigeant des performances exceptionnelles.
La LandMark™ 005 IMU est équipée de capteurs à faible bruit, d’un traitement haute vitesse Velox™ et d’un micrologiciel configurable par l’utilisateur. Le tout dans un boitier robuste conçu pour les performances dans les applications à haute dynamique.
Ses points forts :
- AWR : 0.0018°/s/√Hz
- Size : 2.54 x 2.54 x 1.52 = 9.81 cm³
- Interface : VELOX™ High Speed Processing or VELOX™ Plus option
- Bandwidht : 350Hz to 600Hz (with VELOX™ Plus)
- Message delay : <155µs to <115µs (with VELOX™ Plus)
- Bias stabililty : 0.075°/s
- Data rates : 8kHz to 10kHz (with VELOX™ Plus)
- Non ITAR ECCN 7A994
Documents annexes
Spécifications produit
PERFORMANCES | GYRO | ACCEL |
---|---|---|
Range | 490°/s | 15g |
ARW/VRW | 0.0018°/s/√Hz | 0.040 mg √Hz |
Bias In-Run | 3.5°/h | 0.020 mg |
Bias Over Temp. | 0.075°/s | 0.40 mg |
G Sensitivity | 0.002°/s/g | 1 mg/g² |
Scale Factor Error | 0.05% | 0.05% |
Alignment | 0.5 mrad | 0.8 mrad |
ENVIRONNEMENT | |
---|---|
Shock | 1000g |
Vibration | 8g (50Hz to 2kHz) |
Operating Temp | -50°C to +85°C |
Non-Operating Temp | -55°C to +85°C |
INTERFACE | with VELOX™ (Standard) | with VELOX™ Plus (option) |
---|---|---|
Update Rate | Up to 8 kHz | Up to 10 kHz |
External Sync | Up to 8 kHz | Up to 10 kHz |
Data Format | 16/24/32-bit (user selectable) | 16/24/32-bit (user selectable) |
Max Bandwidth | 350 Hz | 600 Hz (user specified) |
Max Baud Rate | 3.0 Mbaud | 7.5 Mbaud (user specified) |
Digital Message Delay | 70 µs | 30µs |
ELEC. / MEC. | |
---|---|
Input Voltage | +4.5V to +5.5V Max |
Power Consumption | 250mW – 400mW |
Mass | 19 grams |
Size (Metric) / Size (US) | 2.54 x 2.54 x 1.52 = 9.81 cm³ / 1.00 x 1.00 x 0.60 = 0.60 in³ |
Connecteurs pré-câblés optionnels |
---|
18" Pigtail (Flying Lead) -P18 |
36" Pigtail (Flying Lead) -P18 |
18" Micro-D Connector Pre-Wired 9P Plug -C18 |
36" Micro-D Connectir Pre-Wired 9P Plug -C36 |
Modélisation 3D du produit
Fournisseur

La société GLADIATOR TECHNOLOGIES offre une gamme complète de gyromètres, accéléromètres et centrales inertielles (IMU) d'une très haute qualité à bas prix. Les caractéristiques de haut niveau, le GPS embarqué et les sorties bus CAN et RS422/485 permettent de répondre à toutes vos applications.
La société GLADIATOR TECHNOLOGIE est classée Exportation Commerce ECCN7A994<...
Plus d'informations