LandMark™ 005 INS/GPS VELOX™
Le LandMark™ 005 INS/GPS bénéficie de capteurs MEMS à faible bruit et d’un traitement haute vitesse Velox™. Ses performances en font le produit idéal pour le contrôle de vol, la stabilisation d’antenne et la navigation.
Ses points forts :
- ARW : 0.0028°/s/√Hz
- Excellent Inertial Performance : 12 NMPH
- Interface : VELOX™ High Speed Processing
- Non ITAR ECCN 7A994
Documents annexes
Spécifications produit
PERFORMANCES | GYRO | ACCEL |
---|---|---|
Range | 490°/s | 15g |
ARW/VRW | 0.0028°/s/√Hz | 50 μg √Hz |
Bias In-Run | 5°/h | 0.1 mg |
Bias Over Temp. | < 0.1°/s | 1 mg |
Resolution | 0.0012°/s | 0.0064 mg |
G Sensitivity | 0.001°/s/g | 0.0064 mg |
Scale Factor Error | 0.03% (over temperature) | 0.03% (over temperature) |
Alignment | < 0.5 mrad | < 0.5 mrad |
ENVIRONNEMENT | |
---|---|
Shock | 500g |
Vibration | 5.74g (20Hz to 3kHz) |
Operating Temp | -40°C to +85°C |
Non-Operating Temp | -55°C to +100°C |
INS/GPS Performance | |
---|---|
Free Inertial Typical | 12 NMPH (< 60 sec duration) |
Channels | 72 |
GNSS Receiver | GPS L1C/A:GPS SBAS QZSSS BEIDOU B1 GALILEO E1B/C |
SBAS-WASS EGNOS MSAS | < 2 m CEP |
Max Navigation Update Rate (GPS) | Up to 10 Hz |
Velocity Accuracy | 0.1 m/s (250 m/s max) |
GPS Horizontal Position Accuracy | Autonomous 2.5 m |
Startup Time (Inertial) | < 0.65 sec typical (alignment < 2 minutes) |
Update Rate (Inertial | 100, 200, 600 Hz |
Software | Development Kit Available |
ELEC. / MEC. | |
---|---|
Input Voltage | +3.8V to +5.5V Max |
Power Consumption | 700mW – 900mW |
Mass | 55 grams |
Size (Metric) / Size (US) | 2.8 x 2.4 x 5.4 = 34.8cm³ / 1.05 x 0.95 x 2.13 = 2.12 in³ |
Modélisation 3D du produit
Fournisseur

Plus d'informations
* Les caractéristiques de nos matériels sont susceptibles d'être modifiées en fonction des évolutions constructeur et sont affichées à titre indicatif.